Seam failing? We fix it fast.
A dedicated EPDM rubber roofing repair contractor for commercial and industrial properties nationwide — seam repair, puncture and blister repair, ponding water fixes, and recoating. Seam failure is the #1 cause of EPDM leaks, and it's our specialty.
Repair first. Replace only when it's right.
Tell us about your roof — an active leak, aging seams, or a scheduled inspection — and we'll build a clear, no-pressure repair estimate.
- Stop leaks at the source
- Honest repair-vs-replace guidance
- Nationwide commercial & industrial coverage
Millions of square feet of EPDM roofing are now at repair age.
EPDM (ethylene propylene diene monomer) rubber membrane has been the standard commercial and industrial low-slope roofing material since the 1980s and '90s — and a huge share of that installed base is now old enough that repair has become critical. Left unaddressed, small seam splits and punctures lead to deck rot, insulation saturation, interior damage, and a forced premature full replacement.
Seam failure is the #1 cause of EPDM roof leaks. Glued and taped seams degrade over roughly 15-20 years from UV exposure and thermal cycling, and poor original installation can accelerate that timeline significantly. Catching it early — before it becomes an active interior leak — is dramatically cheaper than waiting.
We're a dedicated EPDM repair specialist — not a generalist and not a replacement-first shop. Licensed and insured repair crews serve commercial, industrial, retail, multifamily, and institutional properties nationwide.
Complete EPDM roof repair, nationwide
From seam repair to recoating and emergency leak response — click any service to see how it works, what it costs, and when repair beats replacement.
Honest repair guidance, not an upsell-to-replace shop.
We own the #1 failure mode
Seam failure causes the majority of EPDM leaks — our repair process is built specifically around diagnosing and fixing it before it spreads.
Repair-vs-replace honesty
We weigh membrane age, repair history, and damage extent, and recommend replacement only when repair genuinely isn't the better financial call anymore.
Built for facility managers
Documented reports, priority scheduling for active leaks, and coordination with property management companies managing multi-site portfolios.
Every building type, one nationwide repair specialist.
From retail centers to industrial warehouses, multifamily complexes to institutional facilities — we schedule repairs around your operations, not the other way around.
See who we serveFrom free inspection to a watertight roof
Free inspection
We assess your roof, document every seam, penetration, and problem area, and give you a clear, itemized estimate.
Diagnose the cause
We identify whether it's seam failure, a puncture, ponding water, or flashing — and give you honest repair-vs-replace guidance.
Repair
Our crews reinforce seams, patch punctures, correct drainage, or recoat — matched to what your roof actually needs.
Verify & document
We inspect the finished repair and provide documentation for your maintenance records.
EPDM roof repair FAQs
Minor seam or patch repairs typically run $300-$1,500 per repair, while general commercial EPDM repair work runs roughly $4-$12/sq ft depending on severity. Major membrane repair or partial replacement often lands in the $4,000-$8,000+ range. Every roof is different — a free inspection gets you a firm number.
Seam failure is the #1 cause of EPDM roof leaks. Glued or taped seams degrade over roughly 15-20 years from UV exposure and thermal cycling, and poor original installation can accelerate the timeline. Regular inspection catches lifting and separation before it becomes an active leak.
Often, yes. The right call depends on membrane age, what percentage of the roof is affected, how many prior repairs it's had, and how much ponding or moisture is present. We give honest repair-vs-replace guidance — we recommend replacement only when repair genuinely isn't the better financial call anymore.
If water sits for more than 48 hours, yes — the industry standard is that ponding beyond that window accelerates membrane degradation through concentrated UV exposure and added structural load. Many ponding issues can be corrected with drainage fixes rather than a full re-roof.
Yes. We prioritize active-leak calls with rapid response, including temporary dry-in when needed, followed by a permanent repair scheduled as quickly as possible to minimize disruption to your operations.
Yes — a large share of our work comes through property management companies and facility managers coordinating repairs across retail, industrial, multifamily, and institutional portfolios nationwide.
Get your free repair estimate
Tell us about your EPDM roof and we'll put together a clear, no-pressure repair estimate — commercial or industrial, anywhere in the country.